Forklift licence course (LF)

Price $480pp*

DurationApprox. 2-3 days, depending on site requirements, equipment type, participant experience, and assessment scheduling. 

QLD Forklift Licence Training - LF High Risk Work  -This course is aligned to TLILIC0003 Licence to operate a forklift truck and is suitable for both new and experienced forklift operators.

The LF class applies to forklift trucks with a mast and elevating load carriage, where the forks or attachment can be raised 900 mm or more.

ReadyWork Australia provides onsite forklift licence training and assessment for workplaces seeking High Risk Work Licence class LF outcomes for their staff.

Training is delivered at your facility. This helps participants train on the equipment, loads, traffic areas, and workplace procedures they are likely to use day to day.

How The Process Works

1. Confirm suitability
   We confirm participant numbers, experience level, site requirements, equipment, loads, training area, and assessment requirements. 
2. Train onsite
   Participants complete forklift training at your workplace, using familiar equipment and site conditions where suitable. 
3. Complete assessment
   Participants complete the required theory, calculations, and practical assessment components for the LF licence class. 
4. Apply for HRW licence
   When deemed competent, participants receive the required documentation to apply for their Queensland HRW licence or add LF to an existing HRW licence. 

Why Onsite Training Helps

• Less downtime compared with sending staff offsite 
• Training can reflect your equipment, loads, traffic flow, and site procedures 
• Practical examples are more relevant to everyday work 
• Easier for supervisors to coordinate multiple staff 

Training Covers

• Workplace hazard identification and risk controls 
• Forklift pre-start, visual and functional checks 
• Data plate, rated capacity, load centre, and attachment awareness 
• Planning forklift work and assessing operating surfaces 
• Load handling, stacking, and safe travel 
• Pedestrian awareness, exclusion zones, and traffic management 
• Stability, ramps, and visibility 
• Communication with other workers and site personnel 
• Parking, shutdown, and post-operational checks 
• Preparation for the LF High Risk Work assessment 

Requirements

• Participant must be eligible to apply for a Queensland HRW licence 
• Suitable photo ID. Refer to https://www.worksafe.qld.gov.au/licensing-and-registrations/work-health-and-safety-licences/apply-renew-or-replace-licences/evidence-of-identity
• A safe forklift in working condition 
• A safe and suitable area for practical training and assessment 
• Pallets, loads, and space suitable for forklift activities 
• Required PPE 

Outcome Participants deemed competent receive a Statement of Attainment for TLILIC0003 Licence to operate a forklift truck (LF).

Price $495pp*

Duration Approx. 2-3 days, depending on site requirements, equipment type, participant experience, and assessment scheduling.

QLD Order Picker Licence Training - LO High Risk Work - This course is aligned to TLILIC0004 Licence to operate an order picking forklift truck and is suitable for both new and experienced order picker operators.

The LO class applies to order-picking forklift trucks, where the operator is raised with the load carriage/platform for order-picking work.

ReadyWork Australia provides onsite order picker licence training and assessment for workplaces seeking High Risk Work Licence class LO outcomes for their staff.

Training is delivered at your facility. This helps participants train on the equipment, picking areas, traffic flow, stock locations, and workplace procedures they are likely to use day to day.

How The Process Works

1. Confirm suitability We confirm participant numbers, experience level, site requirements, order picker type, training area, loads, picking tasks, and assessment requirements.
2. Train onsite Participants complete order picker training at your workplace, using familiar equipment and site conditions where suitable.
3. Complete assessment Participants complete the required theory, calculations, and practical assessment components for the LO licence class.
4. Apply for HRW licence When deemed competent, participants receive the required documentation to apply for their Queensland HRW licence or add LO to an existing HRW licence.

Why Onsite Training Helps

• Less downtime compared with sending staff offsite
• Training can reflect your equipment, stock layout, traffic flow, and site procedures
• Practical examples are more relevant to everyday order picking work
• Easier for supervisors to coordinate multiple staff

Training Covers

• Workplace hazard identification and risk controls
• Order picker pre-start, visual and functional checks
• Data plate, rated capacity, load centre, and attachment awareness
• Planning order picking work and assessing operating areas
• Safe travel, steering, braking, and positioning
• Load handling, picking, placing, and platform awareness
• Pedestrian awareness, exclusion zones, and traffic management
• Stability, height, visibility, and speed control
• Communication with other workers and site personnel
• Parking, shutdown, and post-operational checks
• Preparation for the LO High Risk Work assessment

Requirements

• Participant must be eligible to apply for a Queensland HRW licence
• Suitable photo ID. Refer to https://www.worksafe.qld.gov.au/licensing-and-registrations/work-health-and-safety-licences/apply-renew-or-replace-licences/evidence-of-identity
• A safe order picker in working condition
• A safe and suitable area for practical training and assessment
• Suitable stock or loads for practical activities
• Suitable picking area, aisle space, or racking access where required
• Required PPE

Outcome Participants deemed competent receive a Statement of Attainment for TLILIC0004 Licence to operate an order picking forklift truck (LO).

 Price $799pp* (Normally $899pp, Expires 31.10.2026)

Duration Approx. 3-4 days, depending on site requirements, equipment type, participant experience, and assessment scheduling.

QLD Forklift & Order Picker Licence Training - LF + LO High Risk Work Combo - This combo course is aligned to TLILIC0003 Licence to operate a forklift truck and TLILIC0004 Licence to operate an order picking forklift truck. It is suitable for workplaces wanting staff trained and assessed for both LF and LO High Risk Work licence classes.

ReadyWork Australia provides licence training and assessment for workplaces seeking both LF and LO outcomes for their staff. 

Training is delivered at your facility. This helps participants train on the equipment, loads, picking areas, traffic flow, stock locations, and workplace procedures they are likely to use day to day.

Why Book The Combo?

Booking the combo can help reduce downtime and simplify scheduling.

How The Process Works

1. Confirm suitability We confirm participant numbers, experience level, site requirements, forklift and order picker types, training areas, loads, picking tasks, and assessment requirements. 
2. Train onsite Participants complete LF and LO training at your workplace, using familiar equipment and site conditions where suitable. 
3. Complete assessments Participants complete the required theory, calculations, and practical assessment components for each licence class. LF and LO are two separate High Risk Work assessments. 
4. Apply for HRW licence When deemed competent, participants receive the required documentation to apply for their Queensland HRW licence or add LF and LO to an existing HRW licence. 

Why Onsite Training Helps

• Less downtime compared with sending staff offsite 
• Training can reflect your equipment, loads, stock layout, traffic flow, and site procedures 
• Practical examples are more relevant to everyday forklift and order picking work 
• Easier for supervisors to coordinate multiple staff 

Training Covers

• Workplace hazard identification and risk controls 
• Pre-start, visual and functional checks 
• Data plate, rated capacity, load centre, and attachment awareness 
• Planning work 
• Safe travel, steering, braking, positioning, and operating surfaces 
• Load handling, stacking, picking, placing, and platform awareness 
• Pedestrian awareness, exclusion zones, and traffic management 
• Stability, ramps, height, visibility, and speed control 
• Communication with site personnel 
• Parking, shutdown, and post-operational checks 
• Preparation for both LF and LO High Risk Work assessments 

Requirements

• Participant must be eligible to apply for a Queensland HRW licence 
• Suitable photo ID. Refer to https://www.worksafe.qld.gov.au/licensing-and-registrations/work-health-and-safety-licences/apply-renew-or-replace-licences/evidence-of-identity
• A safe forklift in working condition 
• A safe order picker in working condition 
• Safe and suitable areas for practical training and assessment 
• Pallets, loads, stock, or suitable materials for practical activities 
• Suitable picking area, aisle space, or racking access where required 
• Required PPE 

Outcome Participants deemed competent receive a Statement of Attainment for TLILIC0003 Licence to operate a forklift truck (LF) and a Statement of Attainment for TLILIC0004 Licence to operate an order picking forklift truck (LO).

Price $899 per Session* normally $999, Expires 31/10/2026

Duration Approx. 3 hours, depending on site requirements, equipment type, and participant experience.

Suitable for Up to 5 participants per session.

Forklift Refresher Training

A focused refresher session designed to sharpen operator awareness, rebuild confidence, and support safer forklift use across everyday workplace operations. 

Training covers

•  Site hazards, and safe work practices. 
•  Visual and functional checks
• Load handling and safe travel techniques
• Pedestrian awareness and separation
• Forklift stability and speed control
• Parking and shutdown procedures 

The session can be tailored to the workplace requirements, common operator issues, site procedures, and the loads handled.

Requirements

• A safe forklift in working condition
• A safe and suitable area for training
• Pallets or suitable loads for practical activities
• Required PPE

Outcome  Participants receive a non-accredited Forklift training Statement of Attendance

Price $899 per Session* normally $1199, Expires 31/10/2026

Duration Approx. 3 hours, depending on site requirements, equipment type, and participant experience.

Suitable for Up to 5 participants per session.

Order picker Refresher Training

Helps operators reset safe habits and improve confidence. A valuable option to reduce picking risks and reinforce safe operation around racking and warehouse traffic. 

Training covers  

• Site hazards and safe work practices
• Visual and functional checks
• Safe travel and platform operation
• Harness use and height awareness
• Picking procedures and load handling
• Emergency lowering 
• Parking and shutdown procedures 

The session can be tailored to the workplace requirements, common operator issues, site procedures, and the loads handled.

Requirements

• A safe order picker in working condition
• Safe racking
• Suitable load and picking locations for practical activities
• Harnesses and required PPE

Outcome  Participants receive a non-accredited Order picker training Statement of Attendance

Price $899 per Session* normally $999, Expires 31/10/2026

Duration Approx. 2-3 hours, depending on site requirements, equipment type, and participant experience.

Suitable for Up to 5 participants per session.

Walkie Stacker Training
Practical, site-specific training for operators using walkie stackers in warehouses, storage areas, retail sites, loading zones, and production environments.

Training covers  

• Site hazards and safe work practices
• Visual and functional checks
• Load handling and safe travel
• Pedestrian awareness and separation
• Stability, ramps and travel paths
• Emergency controls
• Parking and shutdown procedures

The session can be tailored to the workplace requirements, common operator issues, site procedures, and the loads handled.

Requirements

• A safe walkie stacker in working condition
• A suitable training area with loads
• Access to charging area
• Required PPE

Outcome  Participants receive a non-accredited Walkie Stacker training Statement of Attendance